Addressable Fire Alarm System

Fireguard FG-EVAC Audio System

FG-EVAC-500

EVAC Audio Systems provide voice communication. The Audio Controller has built in two amplifier 500 watt with backup and built in power supply charger 30 hours stand by + 30 minutes Evac. It continues to provide two simultaneous channels EVAC and Alert 10 minutes and optional 3 x balanced audio input + 2 Mixer. Digitized alarm tones and digitally recorded voice messages and message construction, and manages both multiple 8 button microphone zone inputs and 3 audio inputs with 1 Mixer and 2 message player and 6 audio output.

Request information

Specifications

Amplifiers: Built-in two amplifier 500 watt with backup
Power Supply / Charger: 30 hours stand by + 30 minutes Evac
Channels: Two simultaneous channels EVAC and Alert (10 minutes)
Audio Inputs: Optional 3 x balanced audio input + 2 Mixer
Microphone Zone Inputs: Multiple 8 button microphone zone inputs
Audio Outputs: 6 audio output
Pre-AMP Outputs: 4 pre-AMP outputs
Override Outputs: 6 override outputs

Available variants

FG901CP_AP

Variant

Fire Alarm Control Panel 1-9 Loop

FG901-MININET_AP

Variant

Fire Alarm Control Panel 1 Loop

FG-EVAC-500

Variant

PUBLIC ADDRESS AND VOICE ALARM SYSTEM 500 W 6 zones. Line supervision without return cable (EOL devices not included). DSP processor. 6 control zones. Possibility of wall installation, rack and desk. Integrated battery charger and housing EN 54-4 certified (OPTIONAL: To be activated with USD card). Integration interface with fire alarm panel. EVAC and ALERT pre-recorded messages. All integrated, no need for external applications. 4 pre-AMP outputs. 3 audio inputs with priority and mixed audio input. 6 override outputs.

FG-EVAC-VAP1

Variant

VOICE ALARM PANEL MODEL VAP-1: External remote control that incorporates an emergency microphone and provides direct access to voice evacuation

FG-EVAC-BC

Variant

USD CARD FOR ACTIVATION OF EN54-4 BATTERY CHARGER IN EVAC-500. Battery charger update and activation card EN54-4 for EVAC-500. Once activated, the card becomes a key for the charger to work permanently.

FG-EVAC-MPS8Z

Variant

PAGING MICROPHONE

FG-EVAC-MPS8Z

Variant

Speaker line End Of Line Device

FG-EVAC-RMA2

Variant

19" Rack Fixed Mounting Kit

FG-EVAC-WMA

Variant

Wall Mount Kit For FG-EVAC-500

Features

Alarm/evacuation signal generation with multiple built-in tones
Standard or customized digital message storage and message generation
Automatic or manual operation
Mass Notification operation 1-2 channels simultaneously and optional above 2 channels are available
Audio systems provide dual channel operation
3x audio balance Input and Dry contact to interface external Audio Source and MIC and 1x Mixer and 2 amplifier's Mixer output
1x Bus ACSI to interface 8 Voice alarm panel or 8x MIC or Mixed together up to 8 units
Up 10 x 500 Watt Amplifiers can connect in RS485 to distribute in a group of floors
Each Amplifier support 6x Speakers zones to configure channel #1 EVAC and Channel #2 x Alert and phase evacuation other Speaker zones can be customised message
3 Dry contact relay 1. General Alarm 2. Emergency Evac 3.
Recorded Audio Messages can be import from USB
USB Back up and Restore
Backup Amplifiers 500Watt
Advanced integration Override output 24V, Attenuators, Flash light and 3rd party system
6x Audio Output 24V for Attenuator and Flash Lights and 4 x Pre-Amplifier output
Fire Alarm integration with supervision
Speakers line supervision
Battery supervision
Wiring Method A+B
Wall Mount and Rack mount design